Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Antero™ 840CN03 - PEKK-Z3 - Stratasys Ltd.

Material Data Center offers the following functions for Antero™ 840CN03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Antero datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Thermal properties - Other properties - 3D Data
Any use of this information falls under the rules of our disclaimer.
Product Texts
Antero™ 840CN03 is a PEKK-based FDM thermoplastic with electrostatic dissipative (ESD) properties. The material is filled 3% by weight with carbon nanotubes.
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 150 °C ASTM D 648
DTUL @ 264 psi 153 °C ASTM D 648
Other Standards[S]
Coefficient of Thermal Expansion, MD 50.4 E-6/K ASTM E 831
Glass Transition Temperature 158 °C ASTM D 7426
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Density 1270 kg/m³ ASTM D 792
3D DataValueUnitTest Standard
Tensile modulus, on-edge 3170[1] MPa -
Tensile modulus, upright 3010[2] MPa -
Stress at break, on-edge 65[1] MPa -
Stress at break, upright 50[2] MPa -
Strain at break, on-edge 6[1] % -
Strain at break, upright 1.8[2] % -
Flexural modulus, on-edge 3240[3] MPa -
Flexural modulus, upright 2700[4] MPa -
1: XZ-direction; reference to ASTM D638   2: ZX-direction; reference to ASTM D638   3: XZ-direction; reference to ASTM D790  4: ZX-direction; reference to ASTM D790
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
General Chemical Resistance
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.