Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3473 - (PEI+PPS)-GF - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3473:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
ULTEM 3473 resin is a reinforced blend of polyetherimide (PEI) and polyphenylenesulfide (PPS) that combines the benefits of an amorphous and a semicrystalline material.  Features are an excellent combination of reliable metallization, SMT lead free solder capability and providing extreme dimensional stability up to high temperatures. The material is a light weight alternative to Aluminum solutions, RoHS compliant, easy flowing and injection moldable.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 5.5 cm³/10min ISO 1133
Température 320 °C -
Charge 5 kg -
ASTM Data
Retrait au moulage , parallèle 0.0025 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 0.0035 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 15900 MPa ISO 527
Contrainte à la rupture 146 MPa ISO 527
Déformation à la rupture 1.65 % ISO 527
Module de flexion, 23°C 14500 MPa ISO 178
Résistance à la flexion 201 MPa ISO 178
ASTM Data
Module en traction 15800 MPa ASTM D 638
Résistance de traction à la rupture 156 MPa ASTM D 638
Allongement à la rupture 1.8 % ASTM D 638
Module de flexion 14500 MPa ASTM D 790
Résistance à la flexion 231 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 56 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 390 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 250 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 275 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 19 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 25 E-6/K ISO 11359-1/-2
ASTM Data
DTUL à 66 psi 275 °C ASTM D 648
DTUL à 264 psi 249 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1680 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 150 °C -
Pré-séchage - temps 4 - 6 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 315 - 335 °C -
Température du moule 120 - 180 °C -
Zone 1 270 - 315 °C -
Zone 2 280 - 325 °C -
Zone 3 290 - 335 °C -
Température de la buse 300 - 335 °C -
Vitesse de rotation de vis 40 - 70 rpm -
Contre-pression 0.3 - 0.7 MPa -
Caractéristiques
Transformation
Moulage par injection, Moulage par compression
Certifications
RoHS
Applications
Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.