Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terralene® HD 2400 - (PE-HD) - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Terralene® HD 2400:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terralene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 25 g/10min ISO 1133
Température 190 °C -
Charge 21.6 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 975 MPa ISO 527
Résistance à la traction 26 MPa ISO 527
Déformation au seuil d'écoulement 14 % ISO 527
Contrainte à la rupture 11 MPa ISO 527
Déformation à la rupture 44 % ISO 527
Résistance au choc Charpy, +23°C 140 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 12.4 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 137 °C ISO 11357-1/-3
Propriétés diversesValeurUnitéNorme du test
Masse volumique 935 kg/m³ ISO 1183
Biobased content 60 % -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Type of extrusion blown - -
Pré-séchage - température 60 °C -
Pré-séchage - temps 2 - 4 h -
Caractéristiques
Transformation
Soufflage
Certifications
Contient des ressources renouvelables
Applications
Jouets
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.