Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TECACOMP® LCP LDS black 1049426 - LCP - Ensinger Compounds

Material Data Center offers the following functions for TECACOMP® LCP LDS black 1049426:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecacomp datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.6 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 9700 MPa ISO 527
Résistance à la traction 85 MPa ISO 527
Déformation à la rupture 1.6 % ISO 527
Résistance au choc Charpy, +23°C 15 kJ/m² ISO 179/1eU
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 310 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 221 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 8 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 34 E-6/K ISO 11359-1/-2
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.2 mm -
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Indice de résistance au cheminement 150 - IEC 60112
Other Standards[S]
Résistivité transversale 2.8E15 Ohm*m IEC 61340-2-3
Résistivité superficielle 1.3E15 Ohm IEC 61340-2-3
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Absorption d'humidité 0.1 % Sim. to ISO 62
Masse volumique 1740 kg/m³ ISO 1183
Bulk density 970 kg/m³ -
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 150 °C -
Pré-séchage - temps 3 - 5 h -
L'humidité de traitement ≤0.1 % -
Température de la matière fondue 320 - 350 °C -
Température du moule 80 - 150 °C -
Zone 1 320 °C -
Zone 2 325 °C -
Zone 3 330 °C -
Zone 4 340 °C -
Température de la buse 350 °C -
Pressions d'injection 150 MPa -
Pression de maintien 30 - 90 MPa -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Applications
Automobile, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.