Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TPX® RT18 - PMP - Mitsui Chemicals America, Inc.

Material Data Center offers the following functions for TPX® RT18:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other TPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 26 g/10min ASTM D 1238
Température 260 °C -
Charge 5 kg -
Retrait au moulage , parallèle 1.5 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 1.2 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 1903 MPa ASTM D 638
Module de traction 25 MPa ASTM D 638
Module de traction d’élasticité 30 MPa ASTM D 638
Allongement à la rupture 12 % ASTM D 638
Module de flexion 1600 MPa ASTM D 790
Résistance à la flexion 46 MPa ASTM D 790
Dureté Rockwell R87 - ASTM D 785
Izod choc avec entaille, 1/8 in 19.8 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
coefficient de dilatation thermique, long. 380 E-6/K ASTM D 696
DTUL à 66 psi 127 °C ASTM D 648
Vicat température 174 °C ASTM D 1525
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Résistance volumique 1E16 Ohm*cm ASTM D 257
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 0.7 % ASTM D 1003
Lumière á Transmittance 94 % ASTM D 1003
Indice de réfraction 1.46 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Densité 833 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection, Extrusion de fibres, Extrusion de films
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.