Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® STAMAX™ 30YM240 - PP-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® STAMAX™ 30YM240:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
SABIC® STAMAX 30YM240 is a 30% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength. IMDS ID: 16496906
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 6600 MPa ISO 527
Résistance à la traction 105 MPa ISO 527
Déformation à la rupture 2.3 % ISO 527
Module de flexion, 23°C 6400 MPa ISO 178
Module de flexion 4600 MPa ISO 178
Résistance à la flexion 160 MPa ISO 178
Résistance au choc Charpy, +23°C 60 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 40 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 20 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 27 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 158 °C ISO 75-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1120 kg/m³ ISO 1183
Caractéristiques
Caractéristiques
Long fiber reinforced
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.