Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE M864EG - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE M864EG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques
Any use of this information falls under the rules of our disclaimer.
Informations produit
SABIC® HDPE M864EG is a high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC® HDPE M864EG is available with UV stabilizer as SABIC® HDPE M864SE and M864SG. Typical applications: Crates & Boxes: SABIC® HDPE M864EG is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Caps & Closures: SABIC HDPE® M864EG is typically used for Juice, Milk and Edible Oil applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1450 MPa ISO 527
Contrainte d'écoulement 32 MPa ISO 527
Contrainte à la rupture 15 MPa ISO 527
Déformation à la rupture >50 % ISO 527
Module de flexion, 23°C 1700 MPa ISO 178
Résistance à la flexion 32 MPa ISO 178
Dureté Shore D 65 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 134 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 94 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 129 °C ISO 306
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Stabilisé aux intempéries
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.