Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AECV BLACK T8L - PA12 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AECV BLACK T8L:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit
ISO 16396 - PA12, KGHL, C16-010

Rilsamid® AECV BLACK T8L resin is a black colored polyamide 12. 
This grade is designed for cable coating.


Main applications:
  • Wire and cable sheathing

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. for any use above this limit, please refer to our technical services.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 12 / * cm³/10min ISO 1133
Température 235 / * °C -
Charge 2.16 / * kg -
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 1350 / 1100 MPa ISO 527
Contrainte d'écoulement 41 / 37 MPa ISO 527
Déformation au seuil d'écoulement 5 / 10 % ISO 527
Déformation nominale à la rupture >50 / >50 % ISO 527
Résistance au choc Charpy (entaillé), +23°C - / 8 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C - / 6 kJ/m² ISO 179/1eA
Perforation - force maximum, -30°C - / 5000 N ISO 6603-2
Perforation - Energie, -30°C - / 70 J ISO 6603-2
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 178 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 55 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 135 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 138 / * °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 80 / * E-6/K ISO 11359-1/-2
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 100Hz 4 / - - IEC 62631-2-1
Permittivité relative, 1MHz 3 / - - IEC 62631-2-1
Facteur de pertes, 100Hz 431 / - E-4 IEC 62631-2-1
Facteur de pertes, 1MHz 193 / - E-4 IEC 62631-2-1
Résistivité transversale - / 2E6 Ohm*m IEC 62631-3-1
Résistivité superficielle * / 1E11 Ohm IEC 62631-3-2
Rigidité diélectrique - / 40 kV/mm IEC 60243-1
Indice de résistance au cheminement * / 600 - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 1.6 / * % Sim. to ISO 62
Masse volumique 1010 / 1010 kg/m³ ISO 1183
Fonctions
Contrainte / Déformation , Rilsamid® AECV BLACK T8L (sec), PA12, ARKEMA
Module sécant / Déformation , Rilsamid® AECV BLACK T8L (sec), PA12, ARKEMA
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres), Enduction
Conditionnement
Granulés, Noir
Propriétés spéciales
Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur
Disponibilité régionale
Autres informations
Extrusion (autres)
Processing conditions:
- Typical melt temperature (Min / recommended / Max): 250°C / 260°C / 270°C
- Drying time and temperature (only necessary for bags opened more than two hours): 4 - 8 hours at 80°C
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.