Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamOfin PPH308G8 - PP-GF40 - Polyram

Material Data Center offers the following functions for RamOfin PPH308G8:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramofin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 2.5 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Retrait au moulage, parallèle 0.2 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 95 MPa ISO 527
Déformation à la rupture 3 % ISO 527
Module de flexion, 23°C 6200 MPa ISO 178
Résistance au choc Charpy, +23°C 75 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 60 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 14.5 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 10 kJ/m² ISO 179/1eA
Résistance au choc Izod avec entaille, +23°C 16 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille 9.5 kJ/m² ISO 180/1A
Température -30 °C -
Dureté Rockwell R 115 - ISO 2039-2
ASTM Data
Résistance à la flexion 120 MPa ASTM D 790
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 165 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 150 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 160 °C ISO 75-1/-2
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1220 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Modifié choc, Stabilisé à la chaleur
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.