Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® HSF 33 E - PS - LyondellBasell Industries

Material Data Center offers the following functions for POLYFLAM® HSF 33 E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit
Flame retardant PS grade (UL 94 V-0 at 1,5 mm) without PBDE

UL 94 internal test: 5VA @ 2,5mm

Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 2 cm³/10min ISO 1133
Température 200 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2100 MPa ISO 527
Contrainte d'écoulement 28 MPa ISO 527
Déformation au seuil d'écoulement 2.5 % ISO 527
Résistance au choc Charpy, +23°C 40 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 24 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 8 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 2 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 78 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 88 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 89 °C ISO 306
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Yellow Card disponible oui - -
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
Yellow Card disponible oui - -
Aptitude à l'allumage 27 % ISO 4589-1/-2
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Indice de résistance au cheminement 500 - IEC 60112
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1220 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 70 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 190 - 220 °C -
Température du moule 30 - 60 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion de profilés, Extrusion de plaques, Extrusion (autres), Thermoformage
Conditionnement
Grains
Propriétés spéciales
Ignifugé
Disponibilité régionale
Autres informations
Moulages par injection
PREPROCESSING; Pretreatment
Predrying usually not neccessary (2-4h / 70°C)

PROCESSING ;Processing:

Melttemperature190 - 220°C
Mouldtemperature30 - 60°C
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.