Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® IN-23260 XRD - TPS-X - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® IN-23260 XRD:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
Preliminary Data

The Monprene IN-23200 series of TPS compounds are lubricated, UV stable, easily colorable, and exhibit excellent surface aesthetics and sealability. These materials are designed for extrusion and can be easily co-extruded with PP or other stiffer TPE backbone, making them suitable for seals in window profiles.

Adheres to PP

PropertyValueUnitStandard
Apparent Viscosity (200 °C, 206 1/s)250
PasASTM D3835
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 0.1 g/10min ASTM D 1238
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module à 100% allongement 2 MPa ASTM D 412
Dureté A Shore 70 - ASTM D 2240
Compression rémanente, 22 hr @ 158 °F 50 % ASTM D 395
Résistance de traction à la rupture 11 MPa ASTM D 412
Allongement à la rupture 800 % ASTM D 412
Propriétés diversesValeurUnitéNorme du test
Densité 1090 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Zone 1 216 - 238 °C -
Zone 2 216 - 238 °C -
Zone 3 216 - 238 °C -
Zone 4 216 - 238 °C -
Zone 5 216 - 238 °C -
Température de la buse 216 - 238 °C -
Caractéristiques
Transformation
Extrusion de tubes, Extrusion de profilés, Extrusion (autres)
Conditionnement
Granulés, Couleurs naturelles
Additifs
Lubrifiant
Propriétés spéciales
Stabilisé à la lumière, Stabilisé aux intempéries, Opaque
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.