Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Monprene® CP-11170 - TPE-X - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center
The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11170 is a medium hardness, high density, filled grade that is suitable for injection molding.
Adheres to PP
Property | Value | Unit | Standard |
---|---|---|---|
Tensile Stress at 100% (across flow) | 2.0 | MPa | ISO 37 |
Tensile Stress at Break (across flow) | 10.9 | MPa | ISO 37 |
Tensile Strain at Break (across flow) | 840 | % | ISO 37 |
Tear Strength (across flow) | 31 | kN/m | ISO 34-1 |
Apparent Shear Viscosity (200 °C) | 194 | Pas | ASTM D3835 |
Propriétés mécaniques | Valeur | Unité | Norme du test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Déformation rémanente en compression à 70 °C, 24h | 38 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Résistance à la déchirure | 31 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dureté Shore A | 70 | - | ISO 7619-1 |
Propriétés diverses | Valeur | Unité | Norme du test |
Densité | 1150 | kg/m³ | ASTM D 792 |
Recommandations pour la transformation Moulage par injection | Valeur | Unité | Norme du test |
Pré-séchage - température | 65 | °C | - |
Pré-séchage - temps | 2 - 4 | h | - |
Température de la matière fondue | 182 - 227 | °C | - |
Température du moule | 27 - 49 | °C | - |
Zone 1 | 160 - 177 | °C | - |
Zone 2 | 182 - 204 | °C | - |
Zone 3 | 193 - 216 | °C | - |
Température de la buse | 182 - 227 | °C | - |
Vitesse de rotation de vis | 50 - 100 | rpm | - |
Contre-pression | 0.172 - 0.689 | MPa | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.