Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® RW2407 RE - PC - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® RW2407 RE:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Préparation et conditionnement des éprouvettes
Any use of this information falls under the rules of our disclaimer.
Informations produit
  • MVR (300 °C/1.2 kg) 19 cm³/10 min
  • low viscosity
  • easy release
  • UV stabilized
  • variable content of filler for high reflectance application
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 19 cm³/10min ISO 1133
Température 300 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance au choc Charpy, +23°C N kJ/m² ISO 179/1eU
Perforation - force maximum, +23°C 5100 N ISO 6603-2
Perforation - Energie, +23°C 50 J ISO 6603-2
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, B 144 °C ISO 306
Inflammabilité ep. nom. 1.5 mm V-2 class IEC 60695-11-10
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1340 kg/m³ ISO 1183
Préparation et conditionnement des éprouvettesValeurUnitéNorme du test
ISO Data
Injection, température de la matière fondue 280 °C ISO 294
Injection, température du moule 80 °C ISO 294
Caractéristiques
Propriétés spéciales
Stabilisé aux intempéries
Certifications
ISCC Plus
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.