Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® MD4821 - PC-I-GF20 - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® MD4821:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Préparation et conditionnement des éprouvettes
Any use of this information falls under the rules of our disclaimer.
Informations produit
  • medium viscosity
  • easy release
  • impact modified
  • glass fiber reinforced
  • improved chemical resistance compared to standard Makrolon grades
  • housing parts
  • Information technology
  • electrical/electronic
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 9 cm³/10min ISO 1133
Température 300 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 6100 MPa ISO 527
Contrainte à la rupture 98 MPa ISO 527
Déformation à la rupture 3 % ISO 527
Perforation - force maximum, +23°C 1120 N ISO 6603-2
Perforation - Energie, +23°C 8 J ISO 6603-2
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 138 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 142 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 145 °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 23 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 58 E-6/K ISO 11359-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1310 kg/m³ ISO 1183
Préparation et conditionnement des éprouvettesValeurUnitéNorme du test
ISO Data
Injection, température de la matière fondue 320 °C ISO 294
Injection, température du moule 110 °C ISO 294
Caractéristiques
Propriétés spéciales
Modifié choc
Résistance Chimique
Résistance chimique générale
Applications
IT / Machine de bureau, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.