Any use of this information falls under the rules of our
disclaimer.
Informations produit
High-temperature polyamide with ceramic spheres, flame retardant, black.
Caractéristiques des transformations/physiques | Valeur | Unité | Norme du test |
Other Standards[S] |
Retrait au moulage, parallèle |
0.1 |
% |
DIN 16742 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriétés mécaniques | Valeur | Unité | Norme du test |
ISO Data |
Module en traction |
5500 |
MPa |
ISO 527 |
Résistance à la traction |
55 |
MPa |
ISO 527 |
Propriétés thermiques | Valeur | Unité | Norme du test |
ISO Data |
Température de fléchissement s/chrg, 1.80 MPa |
90 |
°C |
ISO 75-1/-2 |
Inflammabilité pr. épaisseur h |
V-0 |
class |
IEC 60695-11-10 |
Epaisseur de l'éprouvette |
0.4 |
mm |
- |
Propriétés électriques | Valeur | Unité | Norme du test |
Other Standards[S] |
Résistivité superficielle |
1E9 |
Ohm |
DIN 62631-3-2 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriétés diverses | Valeur | Unité | Norme du test |
Masse volumique |
1400 |
kg/m³ |
ISO 1183 |
Recommandations pour la transformation Extrusion | Valeur | Unité | Norme du test |
Pré-séchage - température |
130 |
°C |
- |
Pré-séchage - temps |
6 - 8 |
h |
- |
Zone 1 |
260 - 300 |
°C |
- |
Zone 2 |
260 - 300 |
°C |
- |
Zone 3 |
260 - 300 |
°C |
- |
Température de la buse |
250 - 290 |
°C |
- |
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Granulés, Noir
Propriétés spéciales
Ignifugé, Stabilisé à la chaleur
Caractéristiques
Bas gauchissement
Applications
Filament for 3D Printing
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com