Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Lupolen 4261 AG - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Lupolen 4261 AG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 6 g/10min ISO 1133
Température 190 °C -
Charge 21.6 kg -
ASTM Data
Indice de fluidité, MFI 6 g/10min ASTM D 1238
Température 190 °C -
Charge 21.6 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 900 MPa ISO 527
Contrainte d'écoulement 24 MPa ISO 527
Déformation au seuil d'écoulement 10 % ISO 527
Module de flexion, 23°C 1100 MPa ISO 178
ASTM Data
Module de traction d’élasticité 23.1 MPa ASTM D 638
Allongement à la rupture 600 % ASTM D 638
Module de flexion 1070 MPa ASTM D 790
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 131 °C ISO 11357-1/-3
Température de ramolliss. Vicat, A 126 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 945 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
Densité 945 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Température de la matière fondue 180 - 240 °C -
Caractéristiques
Transformation
Extrusion (autres), Soufflage, Thermoformage
Conditionnement
Granulés
Propriétés spéciales
Modifié choc
Résistance Chimique
Résistance chimique générale, Fissuration à l’environnement, Résistance à oxydation
Applications
Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.