Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ EXL Filament AMHI240F Black - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ EXL Filament AMHI240F Black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés diverses - 3D Data
Any use of this information falls under the rules of our disclaimer.
Informations produit
LEXAN™ EXL AMHI240F filament is a high impact polycarbonate product available in black and white colors. It provides high impact strength and improved ductility over standard polycarbonate at room temperature and extreme low temperatures.
Propriétés diversesValeurUnitéNorme du test
Densité 1190 kg/m³ ASTM D 792
3D DataValeurUnitéNorme du test
Other Standards[S]
Module en traction, flat 1730 MPa ASTM D 638
Module en traction, on-edge 1910 MPa ASTM D 638
Module en traction, upright 1800 MPa ASTM D 638
Contrainte à la rupture, flat 45 MPa ASTM D 638
Contrainte à la rupture, on-edge 55 MPa ASTM D 638
Contrainte à la rupture, upright 40 MPa ASTM D 638
Déformation à la rupture, flat 7 % ASTM D 638
Déformation à la rupture, on-edge 5 % ASTM D 638
Déformation à la rupture, upright 3 % ASTM D 638
Module de flexion, flat 1530 MPa ASTM D 790
Module de flexion, on-edge 1910 MPa ASTM D 790
Module de flexion, upright 1500 MPa ASTM D 790
Résistance au choc Charpy, +23°C, flat 88 kJ/m² ISO 179/1eU
Résistance au choc Charpy, +23°C, on-edge 151 kJ/m² ISO 179/1eU
Résistance au choc Charpy, +23°C, upright 23 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C, flat 19 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, on-edge 30 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, upright 6 kJ/m² ISO 179/1eA
Température de fléchissement s/chrg, 1.80 MPa, flat 139 °C ASTM D 6484
Température de fléchissement s/chrg, 1.80 MPa, on-edge 138 °C ASTM D 6484
Température de fléchissement s/chrg, 1.80 MPa, upright 138 °C ASTM D 6484
Température de ramolliss. Vicat, A, flat 148 °C ASTM D 1525
Température de ramolliss. Vicat, A, on-edge 149 °C ASTM D 1525
Température de ramolliss. Vicat, A, upright 149 °C ASTM D 1525
Coeffic. de dilatation therm. linéique, parallèle, flat 77 E-6/K ASTM E 831
Coeffic. de dilatation therm. linéique, parallèle, on-edge 80 E-6/K ASTM E 831
Coeffic. de dilatation therm. linéique, parallèle, upright 79 E-6/K ASTM E 831
Coeffic. de dilatation therm. linéique, perpend., flat 77 E-6/K ASTM E 831
Coeffic. de dilatation therm. linéique, perpend., on-edge 81 E-6/K ASTM E 831
Coeffic. de dilatation therm. linéique, perpend., upright 79 E-6/K ASTM E 831
Inflammabilité pr. épaisseur h, flat V-0 class UL 94
Inflammabilité pr. épaisseur h, on-edge V-0 class UL 94
Inflammabilité pr. épaisseur h, upright V-2 class UL 94
Epaisseur de l'éprouvette 3.0 mm UL 94
Résistivité transversale, flat 1.4E13 Ohm*m ASTM D 257
Résistivité transversale, on-edge 1.5E13 Ohm*m ASTM D 257
Résistivité transversale, upright 1.5E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Monofilament, Noir
Propriétés spéciales
Modifié choc
Caractéristiques
Dur
Disponibilité régionale
Amérique du nord, Europe, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.