Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kocetal® K300BLG - POM - Kolon Industries

Material Data Center offers the following functions for Kocetal® K300BLG:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kocetal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 10 g/10min ASTM D 1238
Retrait au moulage , parallèle 0.02 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction 60 MPa ASTM D 638
Allongement à la rupture 50 % ASTM D 638
Module de flexion 2500 MPa ASTM D 790
Résistance à la flexion 88 MPa ASTM D 790
Dureté Rockwell M 80 - ASTM D 785
Izod choc avec entaille, 1/8 in 52 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité HB - UL 94
coefficient de dilatation thermique, long. 130 E-6/K ASTM D 696
DTUL à 66 psi 158 °C ASTM D 648
DTUL à 264 psi 110 °C ASTM D 648
Température de fusion 166 °C ASTM D 3418
Vicat température 162 °C ASTM D 1525
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 19 kV/mm ASTM D 149
Facteur de dissipation diélectrique, 1 MHz 0.006 - ASTM D 150
Résistance de la surface >1E15 Ohm ASTM D 257
Résistance volumique 1E14 Ohm*cm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Densité 1410 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Applications
General Purpose
Disponibilité régionale
Amérique du nord, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.