Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilon BM 16 natural - PA* - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grilon BM 16 natural:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Grilon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Propriétés mécaniques (Grades film)
Any use of this information falls under the rules of our disclaimer.
Informations produit

 

Co Polyamide

Transparent Polyamide

Product Attributes

  Highly flexible, High viscosity, Highly transparent, Barrier material

Markets

  Packaging
  Non oriented film, Oriented film, Paper coating

Approvals

  Food Contact
  EU Requirements
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 100 / * cm³/10min ISO 1133
Température 275 / * °C -
Charge 5 / * kg -
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction - / 500 MPa ISO 527
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 164 / * °C ISO 11357-1/-3
Propriétés optiquessec / condUnitéNorme du test
ISO Data
Brillance, 60° 64 / * - ISO 2813
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 10 / * % Sim. to ISO 62
Absorption d'humidité 3 / * % Sim. to ISO 62
Masse volumique 1090 / - kg/m³ ISO 1183
Propriétés mécaniques (Grades film)sec / condUnitéNorme du test
ISO Data
Contrainte au seuil, parallèle 25 / * MPa ISO 527-3
Contrainte au seuil, perpend. 25 / * MPa ISO 527-3
Déformation au seuil, parallèle 9 / * % ISO 527-3
Déformation au seuil, perpend. 7 / * % ISO 527-3
Résistance au déchirement pantalon, parallèle 50 / * N/mm ISO 6383-1
Résistance au déchirement pantalon, perpend. 85 / * N/mm ISO 6383-1
Perméabilité à la vapeur d'eau, 23°C/85%r.h. 16 / * g/(m²*d) ISO 15106-1/-2
Perméabilité à l'oxygène, 23°C/0%r.h. 90 / * cm³/(m²*d*bar) ISO 15105-1/-2
Perméabilité à l'oxygène, 23°C/85%r.h. 70 / * cm³/(m²*d*bar) ISO 15105-1/-2
Perméabilité au gaz carbonique, 23°C/0%r.h. 200 / * cm³/(m²*d*bar) ISO 15105-1/-2
Perméabilité au gaz carbonique, 23°C/85%r.h. 300 / * cm³/(m²*d*bar) ISO 15105-1/-2
Epaisseur des eprouvettes 0.05 / * mm -
Caractéristiques
Transformation
Extrusion de films, Extrusion (autres), Enduction
Conditionnement
Grains, Couleurs naturelles
Propriétés spéciales
Transparent
Caractéristiques
Propriétés barrière, Copolymère
Certifications
Contact alimentaire
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.