Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GX1500A-M41 - PA9T-GF50 - Kuraray Co., Ltd.

Material Data Center offers the following functions for Genestar™ GX1500A-M41:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit
GENESTAR GX1500A-M41 is a 50% GF reinforced injection molding grade provided as pellets. GX1500A-M41 is developed to exhibit superior mechanical properties in the normal direction of molding and is also suited for warpage sensitive parts.

The main features are:
  • Low warpage
  • High mechanical properties in normal direction to the flow
GX1500A-M41 is suitable for:
  • Structural parts and housings
  • Metal replacement
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.1 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.5 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 16700 MPa ISO 527
Contrainte à la rupture 250 MPa ISO 527
Déformation à la rupture 2 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 17 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 300 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 125 °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 280 °C ISO 75-1/-2
ASTM Data
coefficient de dilatation thermique, long. 15 E-6/K ASTM D 696
Coefficient de dilatation thermique, trav. 24 E-6/K ASTM D 696
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.13 % Sim. to ISO 62
Masse volumique 1580 kg/m³ ISO 1183
Fonctions
Contrainte / Déformation , Genestar™ GX1500A-M41, PA9T-GF50, Kuraray
Module sécant / Déformation , Genestar™ GX1500A-M41, PA9T-GF50, Kuraray
Volume spécifique (pvT) , Genestar™ GX1500A-M41, PA9T-GF50, Kuraray
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Noir
Additifs
Agent de démoulage
Propriétés spéciales
Stabilisé à la chaleur
Caractéristiques
Propriétés barrière, Résistance au fluage, Résistance à la fatigue, Haute cristallinité, Bas gauchissement, Stabilité thermique, Soudable
Résistance Chimique
Résistance aux acides, Résistance aux alcalis , Résistance chimique générale, Fissuration à l’environnement, Résistance aux solvants, Résistance aux graisses, Stabilité hydrolytique, Résistance aux huiles
Applications
Automobile, General Purpose
Disponibilité régionale
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.