Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ AN004-30 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ AN004-30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit

Eastar™ Renew AN004-30 Natural copolyester contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but AN004-30 Natural maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Its processability coupled with its outstanding chemical resistance makes it

well suited for thick-wall applications.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.004 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1800 MPa ISO 527
Contrainte d'écoulement 47 MPa ISO 527
Déformation au seuil d'écoulement 4 % ISO 527
Contrainte à la rupture 46 MPa ISO 527
Déformation à la rupture 200 % ISO 527
Module de flexion, 23°C 1850 MPa ISO 178
Résistance à la flexion 65 MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 7.8 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille 4.8 kJ/m² ISO 180/1A
Température -40 °C -
ASTM Data
Module de traction d’élasticité 47 MPa ASTM D 638
Résistance de traction à la rupture 51 MPa ASTM D 638
Allongement d’élasticité 5 % ASTM D 638
Allongement à la rupture 320 % ASTM D 638
Module de flexion 2000 MPa ASTM D 790
Dureté Rockwell R 103 - ASTM D 785
Izod choc avec entaille, 1/8 in 80 J/m ASTM D 256
Izod choc avec entaille, bas température 40 J/m ASTM D 256
Température -40 °C -
Résistance au choc Izod, 1/8 in N J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 66 psi 73 °C ASTM D 648
DTUL à 264 psi 65 °C ASTM D 648
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 0.3 % ASTM D 1003
Lumière á Transmittance 91 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Densité 1200 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 70 °C -
Pré-séchage - temps 3 h -
Température de la matière fondue 230 - 280 °C -
Température du moule 15 - 30 °C -
Caractéristiques
Transformation
Extrusion (autres)
Conditionnement
Couleurs naturelles
Additifs
Agent de démoulage
Propriétés spéciales
Modifié choc, Transparent
Caractéristiques
Propriétés barrière, Soudage à la chaleur, High Gloss, Copolymère
Résistance Chimique
Résistance chimique générale, Résistance aux huiles
Certifications
ISCC Plus
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.