Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 6072A - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Propriétés mécaniques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

• Injection molding grade
• free from plasticizers
• easy flowing
• very good hydrolysis and microbial resistance
• low abrasion
  Application:
• automotive interior applications
• hard - soft systems
• Shoe soles

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Contrainte à 10% de déformation	0.8	MPa	ISO 527
Contrainte à 100% de déformation	3.8	MPa	ISO 527
Contrainte à 300% de déformation	7	MPa	ISO 527
Contrainte à la rupture TPE	27	MPa	ISO 527
Déformation à la rupture TPE	>300	%	ISO 527
Déformation rémanente en compression à 70 °C, 24h	37	%	ISO 815
Résistance à la déchirure	32	kN/m	ISO 34-1
Résistance à l'abrasion	30	mm³	ISO 4649
Dureté Shore A	70	-	ISO 7619-1

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1100	kg/m³	ISO 1183

Recommandations pour la transformation Moulage par injection	Valeur	Unité	Norme du test
Pré-séchage - température	80	°C	-
Pré-séchage - temps	1 - 2	h	-
L'humidité de traitement	≤0.05	%	-
Température de la matière fondue	200 - 220	°C	-
Température du moule	20 - 40	°C	-

Fonctions

Caractéristiques

Transformation

Moulage par injection

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 200-220 °C
Mold temperature: 20-40 °C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.