Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® RAFG500P NC010 - POM - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® RAFG500P is a general purpose medium viscosity acetal homopolymer for injection molding, with reduced lifecycle greenhouse gas emissions and lower fossil resource use. Delrin® RAFG500P has improved processing thermal stability and a good combination of mechanical properties.  It has been developed for applications in contact with food.

Delrin® Renewable Attributed base polymer is produced from 100% bio-feedstock from waste*.  100% certified renewable electricity is used for its production.
This approach helps customers in achieving their sustainability goals.

* according to ISCC Plus mass balance certification.

FOOD CONTACT
This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. For details, individual compliance statements are available from your DuPont representative. 

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	13	cm³/10min	ISO 1133
Température	190	°C	-
Charge	2.16	kg	-
Retrait au moulage, parallèle	2.0	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	1.9	%	ISO 294-4, 2577

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	3100	MPa	ISO 527
Contrainte d'écoulement	71	MPa	ISO 527
Déformation au seuil d'écoulement	17	%	ISO 527
Déformation nominale à la rupture	30	%	ISO 527
Module de fluage en traction, 1h	2800	MPa	ISO 899-1
Module de fluage en traction, 1000h	1600	MPa	ISO 899-1
Résistance au choc Charpy, +23°C	300	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	280	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	9	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	8	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	178	°C	ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa	94	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	158	°C	ISO 75-1/-2
Température de ramolliss. Vicat, B	155	°C	ISO 306
Coeffic. de dilatation therm. linéique, parallèle	110	E-6/K	ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend.	110	E-6/K	ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm	HB	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5	mm	-
Yellow Card disponible	oui	-	-
Inflammabilité pr. épaisseur h	HB	class	IEC 60695-11-10
Epaisseur de l'éprouvette	0.8	mm	-
Yellow Card disponible	oui	-	-

Propriétés diverses	Valeur	Unité	Norme du test
Absorption d'eau	1.4	%	Sim. to ISO 62
Absorption d'humidité	0.4	%	Sim. to ISO 62
Masse volumique	1420	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés, Couleurs naturelles

Additifs

Lubrifiant, Agent de démoulage

Caractéristiques

Stabilité thermique, Homopolymère

Certifications

Contact alimentaire, ISCC Plus

Applications

General Purpose

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases:

·         If moisture is above the Processing Moisture Content recommendation,

·         When a resin container is damaged,

·         When the material is not properly stored in a dry place at room temperature, or

·         When packaging stays open for a significant time.

Résistance Chimique

Acides
	Acide acétique (masse en 5%) (23°C)
	Acide citrique (masse en 10%) (23°C)
	Acide lactique (masse en 10%) (23°C)
	Acide chlorhydrique (masse en 36%) (23°C)
	Acide nitrique (masse en 40%) (23°C)
	Acide sulfurique (masse en 38%) (23°C)
	Acide sulfurique (masse en 5%) (23°C)
	Acide chromique (masse en 40%) (23°C)
Bases
	Hydroxyde de soude (masse en 35%) (23°C)
	Hydroxyde de soude (masse en 1%) (23°C)
	Hydroxyde d'ammoniaque (masse en 10%) (23°C)
Alcool
	Isopropanol (23°C)
	Méthanol (23°C)
	Ethanol (23°C)
Hydrocarbures
	n-Hexane (23°C)
	Toluene (23°C)
	iso-Octane (23°C)
Cetones
	Acetone (23°C)
Ethers
	Diethyl ether (23°C)
Huiles minérales
	Huile moteur multigrade SAE 10W40 (23°C)
	Huile moteur multigrade SAE 10W40 (130°C)
	Huile engrenage hypoide SAE 80/90 (130°C)
	Huile d'isolation (23°C)
Carburants standards
	ISO 1817 Liquide 1 (60°C)
	ISO 1817 Liquide 2 (60°C)
	ISO 1817 Liquide 3 (60°C)
	ISO 1817 Liquide 4 (60°C)
	Carburant stand. sans alcool (de pref. ISO 1817 liquide C) (23°C)
	Carburant stand. avec alcool (de pref. ISO 1817 Liquid 4) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (90°C)
	Gasoil (pref. ISO 1817 liquide F) (>90°C)
Selts
	Chlorure de sodium (masse en 10%) (23°C)
	Hypochlorite de soude (masse en 10%) (23°C)
	Carbonate de soude (masse en 20%) (23°C)
	Carbonate de soude (masse en 2%) (23°C)
	Chlorure de zinc (masse en 50%) (23°C)
Autres
	Acétate d'éthyle (23°C)
	Peroxyde d'hydrogene (23°C)
	Liquide de frein DOT N° 4 (130°C)
	Ethylene glycol (108°C)
	1% nonylphenoxy-polyethyleneoxy dans l'eau (23°C)
	50% Acide oléique + 50% d'huile d'olive (23°C)
	L'eau (23°C)
	L'eau déionisée (90°C)
	Phénol (masse en 5%) (23°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.