Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Decal® 5431 - PF-X - Raschig GmbH

Material Data Center offers the following functions for Decal® 5431:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Decal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.7 % ISO 294-4, 2577
Conductivité thermique du fondu 0.3 W/(m K) -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 5000 MPa ISO 527
Résistance à la traction 60 MPa ISO 527
Module de flexion, 23°C 7000 MPa ISO 178
Résistance au choc Charpy, +23°C 7.5 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 3 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 170 °C ISO 75-1/-2
Température de fléchissement s/chrg, 8.00 MPa 110 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 30 E-6/K ISO 11359-1/-2
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.6 mm -
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Permittivité relative, 100Hz 14 - IEC 62631-2-1
Permittivité relative, 1MHz 5 - IEC 62631-2-1
Facteur de pertes, 100Hz 7000 E-4 IEC 62631-2-1
Facteur de pertes, 1MHz 700 E-4 IEC 62631-2-1
Résistivité transversale >1E13 Ohm*m IEC 62631-3-1
Résistivité superficielle 1E14 Ohm IEC 62631-3-2
Rigidité diélectrique 25 kV/mm IEC 60243-1
Indice de résistance au cheminement 175 - IEC 60112
ASTM Data
Résistance à l’arc 6 s ASTM D 495
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 1.5 % Sim. to ISO 62
Masse volumique 1400 kg/m³ ISO 1183
Bulk density 625 kg/m³ -
Caractéristiques
Transformation
Moulage par injection, Moulage par compression
Conditionnement
Granulés, Noir
Disponibilité régionale
Amérique du nord, Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.