Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bio-Flex® FX 1135 - PLA... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Bio-Flex® FX 1135:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bio-Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés diverses - Propriétés mécaniques (Grades film) - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
Soil degradable polymer compound suitable for blown film applications. Certified as biodegradable soil according to EN ISO 17556. Use in applications such as mulch film.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 3.2 g/10min ISO 1133
Température 190 °C -
Charge 2.16 kg -
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1410 kg/m³ ISO 1183
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ISO Data
Module en traction, parallèle 240 MPa ISO 527-3
Module en traction, perpend. 180 MPa ISO 527-3
Déformation au seuil, parallèle 370 % ISO 527-3
Déformation au seuil, perpend. 560 % ISO 527-3
Contrainte à la rupture, parallèle 25.5 MPa ISO 527-3
Contrainte à la rupture, perpend. 23 MPa ISO 527-3
Déformation maximale, parallèle 375 % ISO 527-3
Déformation maximale, perpend. 560 % ISO 527-3
Type d'extrusion soufflage - -
Epaisseur des eprouvettes 0.032 mm -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Type of extrusion blown - -
Pré-séchage - température 60 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 190 °C -
Température - Zone d'alimentation 30 - 40 °C -
Zone 1 160 °C -
Zone 2 170 °C -
Zone 3 170 °C -
Zone 4 170 °C -
Température de la buse 175 °C -
Caractéristiques
Transformation
Extrusion a film soufflé, Extrusion de films
Conditionnement
Granulés, Couleurs naturelles
Certifications
Contient des ressources renouvelables, Biodégradables, Contact alimentaire
Applications
Emballage, Jouets
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.