Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALCOM TCD PA6 5060 FR 15090 - PA6-X FR... - MOCOM Compounds GmbH & Co. KG

Check here, which other Alcom datasheets, application examples or technical articles are available in Material Data Center

Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Base Polymer	Polyamide 6
Filler/Additive System	special filler
Special Features	thermal conductive,electrically insulating,heat stabilised,halogen-free flame retardant,opaque
Market Segment	Automotive,Machinery,electrical and electronic,Lighting
Application Area	radiator systems,cooling system
Typical Applications	housings,functional components,plugs / connectors,lamp sockets

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	10000	MPa	ISO 527
Contrainte à la rupture	80	MPa	ISO 527
Déformation à la rupture	1.5	%	ISO 527
Résistance au choc Charpy, +23°C	30	kJ/m²	ISO 179/1eU

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa	175	°C	ISO 75-1/-2
Température de ramolliss. Vicat, B	215	°C	ISO 306
Inflammabilité ep. nom. 1.5 mm	V-2	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5	mm	-

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Rigidité diélectrique	27	kV/mm	IEC 60243-1
Indice de résistance au cheminement	600	-	IEC 60112

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1630	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Propriétés spéciales

Ignifugé, Thermoconducteur

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, Proche-Orient/Afrique

Autres informations

Moulages par injection

Pre-Drying Conditions	80 °C in a dry air (dessiccant) dryer for 2-12 h max. moisture content <0,15 %
Processing Injection Moulding	melt temperature 280-300 °C mould temperature 100-120 °C
Storage	dry, protected from light

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.