Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALCOM PBT 700/1 GF30 PTFE15 - (PBT+PTFE)-GF30 - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALCOM PBT 700/1 GF30 PTFE15:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Alcom datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Base PolymerPolybutylene Terephthalate
Filler/Additive System30 % glass fibres,15 % PTFE
Special Featuresimproved sliding / wear,high stiffness
Market SegmentAutomotive,Machinery
Application Areagear wheels, roller bearings
Typical Applicationsfunctional components,bearings and sliding elements
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 8 cm³/10min ISO 1133
Température 260 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 10400 MPa ISO 527
Contrainte à la rupture 125 MPa ISO 527
Déformation à la rupture 2.8 % ISO 527
Résistance au choc Charpy, +23°C 60 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 9 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 210 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 214 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1650 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Autres informations
Moulages par injection
Pre-Drying Conditionsin a dry air (dessiccant) dryer 100-120 °C
for 2-4 h
in an air circulating dryer 100-120 °C
for 4-8 h
dependant on moisture content
Processing Injection Mouldingmelt temperature 250-270 °C
mould temperature 80-120 °C
Storagedry, protected from light
not above 30°C
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.