Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALCOM LB PA6 2015 14041 WT1063-16 - PA6 - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALCOM LB PA6 2015 14041 WT1063-16:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Alcom datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Base PolymerPolyamide 6
Filler/Additive System15 % glass fibres,8 % special filler
Special Featureshighly reflective,opaque,slip agent,heat stabilised
Market SegmentAutomotive,electrical and electronic,Lighting
Application Arealighting,interior decoration / finishing,light blocking components
Typical Applicationslight guides,reflectors,handles
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 5400 / - MPa ISO 527
Contrainte à la rupture 85 / - MPa ISO 527
Déformation à la rupture 2 / - % ISO 527
Résistance au choc Charpy, +23°C 30 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 3 / - kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 197 / * °C ISO 75-1/-2
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1310 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Blanc
Propriétés spéciales
Stabilisé à la chaleur, Opaque
Applications
Automobile, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, Proche-Orient/Afrique
Autres informations
Moulages par injection
Pre-Drying Conditionsin a dry air (dessiccant) dryer <80 °C
for 2-12 h
max. moisture content <0,15 %
Processing Injection Mouldingmelt temperature 270-290 °C
mould temperature 80-100 °C
Storagedry, protected from light
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.