Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TOYOLAC® 844V-X05 - ABS - Toray Industries, Inc.

Material Data Center offers the following functions for TOYOLAC® 844V-X05:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toyolac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
This material is produced by Toray Plastics (Malaysia).
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 34 g/10min ISO 1133
Temperatura 220 °C -
Carga 10 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 43 MPa ISO 527
Alargamiento a rotura 5 % ISO 527
Módulo de flexión, 23°C 2100 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 14 kJ/m² ISO 179/1eA
Dureza Rockwell R 105 - ISO 2039-2
ASTM Data
Esfuerzo de tracción 41 MPa ASTM D 638
Alargamiento a la rotura 5 % ASTM D 638
Módulo de flexión 2230 MPa ASTM D 790
Dureza Rockwell R 105 - ASTM D 785
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 74 °C ISO 75-1/-2
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Combustibilidad 5V a espesor h 5VA class IEC 60695-11-20
Espesores de probeta 2.5 mm -
ASTM Data
Estabilidad al calor @ 264 psi 82 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1160 kg/m³ ISO 1183
Densidad 1160 kg/m³ ASTM D 792
Características
Aditivos
Ignifugante
Características especiales
Resistencia mejorada al fuego
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.