Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX138H - Asia - (PPE+PS)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PX138H - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
NORYL™ PX138H resin is a 20% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability.

UL Yellow Card Link E207780-228575
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 2 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 5 kg -
ASTM Data
Índice de fluidez, MFI 2.7 g/10min ASTM D 1238
Temperatura 280 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 6000 MPa ISO 527
Esfuerzo de fluencia 90 MPa ISO 527
Alarg. en límite elástico 3 % ISO 527
Resistencia a la tracción 90 MPa ISO 527
Alargamiento a rotura 3 % ISO 527
Modulo de Flexión 5400 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 8 kJ/m² ISO 179/1eA
Res. impacto Izod c/entalla, +23°C, 4mm 30 kJ/m² ISO 180/1A
Res. impacto Izod c/entalla, -30°C, 4mm 33 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 6500 MPa ASTM D 638
Esfuerzo de fluencia a tracción 100 MPa ASTM D 638
Esfuerzo de fractura a tracción 100 MPa ASTM D 638
Alargamiento a la fluencia 3 % ASTM D 638
Alargamiento a la rotura 3 % ASTM D 638
Módulo de flexión 5300 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 90 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 100 J/m ASTM D 256
Temperatura -30 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 135 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 143 °C ISO 306
Temp. reblandecimiento Vicat, 120°C/h 50N 147 °C ISO 306
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.5 mm -
ASTM Data
Estabilidad al calor @ 264 psi 137 °C ASTM D 648
Temperatura Vicat 143 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.12 % Sim. to ISO 62
Absorción de humedad 0.04 % Sim. to ISO 62
Densidad 1230 kg/m³ ISO 1183
Densidad 1230 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 110 - 120 °C -
Tiempo de pre-secado 3 - 4 h -
Humedad de procesamiento ≤0.02 % -
Temperatura de la masa 300 - 325 °C -
Temperatura del molde 80 - 110 °C -
Zona 1 265 - 315 °C -
Zona 2 275 - 320 °C -
Zona 3 290 - 325 °C -
Velocidad de giro de husillo 20 - 100 rpm -
Contrapresión 0.3 - 0.7 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Resistencia quimica
Estabilidad hidrolitica
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.