Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer CXT19EX - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer CXT19EX - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
LEXAN™ CXT19EX resin is a High Heat Polycarbonate Copolymer Resin with Vicat of 190°C and crystal clear transparency. This resin is optimized for sheet and film extrusion applications, has a low plateout and a broad processing window with limited yellowing. It is available in limited transparent colors.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 13 cm³/10min ISO 1133
Temperatura 330 °C -
Carga 2.16 kg -
ASTM Data
Índice de fluidez, MFI 15 g/10min ASTM D 1238
Temperatura 330 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2500 MPa ISO 527
Esfuerzo de fluencia 80 MPa ISO 527
Alarg. en límite elástico 7.5 % ISO 527
Resistencia a la tracción 65 MPa ISO 527
Alargamiento a rotura 25 % ISO 527
Modulo de Flexión 2550 MPa ISO 178
Resistencia al impacto Charpy, +23°C, 3mm N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C, 3mm 9 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C, 3mm 7 kJ/m² ISO 179/1eA
Resistencia al impacto Izod, +23°C N kJ/m² ISO 180/1U
. impacto Izod c/entalla, +23°C, 3mm 8 kJ/m² ISO 180/1A
Res. impacto Izod c/entalla, -30°C, 3mm 6 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 2600 MPa ASTM D 638
Esfuerzo de fluencia a tracción 80 MPa ASTM D 638
Esfuerzo de fractura a tracción 65 MPa ASTM D 638
Alargamiento a la fluencia 7.5 % ASTM D 638
Alargamiento a la rotura 25 % ASTM D 638
Módulo de flexión 2600 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 80 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 70 J/m ASTM D 256
Temperatura -30 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 172 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 187 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, 120°C/h 50N 192 °C ISO 306
Conductibilidad termica 0.2 W/(m K) DIN 52616
ASTM Data
Estabilidad al calor @ 66 psi 187 °C ASTM D 648
Estabilidad al calor @ 264 psi 172 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.5 % Sim. to ISO 62
Absorción de humedad 0.3 % Sim. to ISO 62
Densidad 1220 kg/m³ ISO 1183
Densidad 1220 kg/m³ ASTM D 792
Características
Características especiales
Transparente
Applicaciones
Automotriz
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.