Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory G 16 natural - PA6I/6T - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grivory G 16 natural:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Product-nomenclature: ISO 16396-PA6I/6T,,FT,S09-030

 

Co Polyamide

Partially aromatic Polyamide

Product Attributes

  Highly transparent, Barrier material, Improved UV resistance (outdoor use)

Markets

  Packaging
  Paper coating, Cosmetics / Personal care

Approvals

  Food Contact
  EU Requirements, FDA
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 100 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carga 5 / * kg -
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3000 / 3000 MPa ISO 527
Esfuerzo de fluencia 100 / 100 MPa ISO 527
Alarg. en límite elástico 5 / 5 % ISO 527
Alarg. nominal a rotura >50 / >50 % ISO 527
Resistencia al impacto Charpy c/entalla, +23°C 8 / 8 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 8 / 2 kJ/m² ISO 179/1eA
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min 125 / * °C ISO 11357-1/-2
Propiedades opticasSeco / CondUnidadesMétodo de ensayo
ISO Data
Brillo, 60° 160 / * - ISO 2813
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 7 / * % Sim. to ISO 62
Absorción de humedad 2 / * % Sim. to ISO 62
Densidad 1180 / - kg/m³ ISO 1183
Propiedades mecánicas (Film)Seco / CondUnidadesMétodo de ensayo
ISO Data
Tensión a fluencia, paralelo 85 / * MPa ISO 527-3
Tensión a fluencia, normal 85 / * MPa ISO 527-3
Alargamiento a fluencia, paralelo 5 / * % ISO 527-3
Alargamiento a fluencia, normal 5 / * % ISO 527-3
Alargamiento máximo, paralelo 200 / * % ISO 527-3
Alargamiento máximo, normal 200 / * % ISO 527-3
Resistencia al desgarro Elmendorf, paralelo 10 / * N ISO 6383-2
Resistencia al desgarro Elmendorf, normal 10 / * N ISO 6383-2
Resistencia al desgarro Trouser, paralelo 5 / * N/mm ISO 6383-1
Resistencia al desgarro Trouser, normal 5 / * N/mm ISO 6383-1
WVTR, 23°C/85%r.h. 7 / * g/(m²*d) ISO 15106-1/-2
Prop. de transm. de oxígeno, 23°C/0%r.h. 30 / * cm³/(m²*d*bar) ISO 15105-1/-2
Prop. de transm. de oxígeno, 23°C/85%r.h. 10 / * cm³/(m²*d*bar) ISO 15105-1/-2
Prop. de transm. de Anhídr. carbónico, 23°C/0%r.h. 90 / * cm³/(m²*d*bar) ISO 15105-1/-2
Prop. de transm. de Anhídr. carbónico, 23°C/85%r.h. 40 / * cm³/(m²*d*bar) ISO 15105-1/-2
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusion del film, Recubrimiento, Moldeo por soplado
Forma de suministro
Granulado, Color natural
Características especiales
Estable contra rayos U.V./interperie, Transparente
Características
Propiedades de barrera, Copolímero
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR
Applicaciones
Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.