Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Xtel® XK2340 - PPS-GF - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Xtel® XK2340:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Xtel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.3 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 0.6 % ISO 294-4, 2577
Conductibilidad termica de fusión 0.23 W/(m K) -
ASTM Data
Contracción posterior al moldeo, paralelo 0.003 mm/mm ASTM D 955
Contracción posterior al moldeo, normal 0.006 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 195 MPa ISO 527
Módulo de flexión, 23°C 12000 MPa ISO 178
Resistencia al impacto Izod, +23°C 35 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 9 kJ/m² ISO 180/1A
ASTM Data
Esfuerzo de tracción 186 MPa ASTM D 638
Resistencia de compresión 248 MPa ASTM D 695
Módulo de flexión 12410 MPa ASTM D 790
Resistencia a la flexión 248 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 90.7 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 641 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 245 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 20 E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 55 E-6/K ISO 11359-1/-2
Combustibilidad a espesor h HB class IEC 60695-11-10
ASTM Data
Combustibilidad UL 94 HB - UL 94
Estabilidad al calor @ 264 psi 243 °C ASTM D 648
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistencia dieléctrica, tiempo corto 21.7 kV/mm ASTM D 149
Factor de pérdidas dieléctricas, 1 MHz 0.01 - ASTM D 150
Constante dieléctrica, 1 MHz 3.8 - ASTM D 150
Resistividad volumétrica 1E14 Ohm*cm ASTM D 257
Resistencia al arco 100 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1560 kg/m³ ISO 1183
Absorción de agua, 24hr 0.3 % ASTM D 570
Densidad 1560 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Negro
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.