Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9057 OR E20081 - PA12 FR(30+40) - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9057 OR E20081:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Low-viscosity, self-extinguishing PA12 Compound, free of halogen, PA12 FR(30 40)

VESTAMID® LX9057 OR E20081 is a heat- stabilized compound with an efficient halogen-free flame retardant. Tested according to UL94, it complies with the flammability classification V-2.

The halogen-free formulation makes VESTAMID® LX9057 OR E20081 especially suitable for the electronic and cable industry.

VESTAMID® LX9057 OR E20081 can be used for injection molding as well as for wire extrusion coating.

The semi-crystalline compounds based on PA12 only absorb small amounts of water. Therefore manufactured parts exhibit excellent dimensional stability at changing ambient humidity, constant high toughness, low coefficient of friction and good chemical resistance.
  
Due to the presence of flame retardant the melt temperature should not exceed 240°C. We recommend melt temperatures of 200°C-220°C.
 
VESTAMID® LX9057 OR is supplied as cylindrical granules, ready for processing, in moisture-proof bags.
 
Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 45 / * cm³/10min ISO 1133
Temperatura 220 / * °C -
Carga 2.16 / * kg -
Contracción posterior al moldeo, paralelo 0.9 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.0 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1200 / 820 MPa ISO 527
Esfuerzo de fluencia 37 / 33 MPa ISO 527
Alarg. en límite elástico 12 / 17 % ISO 527
Alarg. nominal a rotura >50 / >50 % ISO 527
Resistencia al impacto Charpy, +23°C 130 / N kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistencia al impacto Charpy, -30°C 69 / 122 kJ/m² ISO 179/1eU
Type of failure C / C - -
Resistencia al impacto Charpy c/entalla, +23°C 3 / 7 kJ/m² ISO 179/1eA
Type of failure C / C - -
Resistencia al impacto Charpy c/entalla, -30°C 3 / 2 kJ/m² ISO 179/1eA
Type of failure C / C - -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 176 / * °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 55 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 130 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 136 / * °C ISO 306
Combustibilidad a 1.5mm esp. nom. V-2 / * class IEC 60695-11-10
Espesores de probeta 1.5 / * mm -
Yellow Card disponible sí / * - -
Combustibilidad a espesor h V-2 / * class IEC 60695-11-10
Espesores de probeta 0.8 / * mm -
Yellow Card disponible sí / * - -
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz 4.5 / 7.5 - IEC 62631-2-1
Constante dieléctrica, 1MHz 3.2 / 3.5 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz 920 / 1920 E-4 IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz - / 537 E-4 IEC 62631-2-1
Resistividad volumétrica específica 7.4E11 / 9.3E9 Ohm*m IEC 62631-3-1
Resistencia dieléctrica 35 / 36 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 600 / - - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 1.8 / * % Sim. to ISO 62
Absorción de humedad 0.8 / * % Sim. to ISO 62
Densidad 1080 / - kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección, Recubrimiento
Forma de suministro
Sémola
Características especiales
Resistencia mejorada al fuego, Sin halógeno, Estable contra el calor
Características
Grado tribológico
Resistencia quimica
Resistencia química general
Applicaciones
Electrica
Disponibilidad regional
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.