Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3035 LU 1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3035 LU 1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 1 g/10min ISO 1133
Temperatura 235 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 0.7 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.5 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 1.3 g/10min ASTM D 1238
Temperatura 235 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 50 MPa ISO 527
Alarg. en límite elástico 4 % ISO 527
Alargamiento a rotura >50 % ISO 527
Módulo de flexión, 23°C 1500 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 20 kJ/m² ISO 179/1eA
Dureza Shore D 79 - ISO 7619-1
Dureza Rockwell R 107 - ISO 2039-2
ASTM Data
Esfuerzo de fluencia a tracción 46 MPa ASTM D 638
Esfuerzo de fractura a tracción 56 MPa ASTM D 638
Alargamiento a la rotura 250 % ASTM D 638
Módulo de flexión 1590 MPa ASTM D 790
Resistencia a la flexión 61 MPa ASTM D 790
Dureza Rockwell R 112 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 86.5 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 178 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 45 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 105 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 120 E-6/K ISO 11359-1/-2
ASTM Data
Estabilidad al calor @ 66 psi 149 °C ASTM D 648
Temperatura de fusión 178 °C ASTM D 3418
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1020 kg/m³ ISO 1183
Densidad 1020 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Otros tipos de extrusión, Recubrimiento
Forma de suministro
Negro
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.