Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound G3240A - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound G3240A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
SABIC® PPcompound G3240A is a 40% short glass fiber reinforced Polypropylene for under-the-hood and structural applications. The base material is a PP homopolymer and is available in standard black. The glass fibres are chemically coupled to the PP matrix SABIC® PPcompound G3240A is a designated automotive grade. IMDS ID: 139448304
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 8900 MPa ISO 527
Resistencia a la tracción 110 MPa ISO 527
Alargamiento a rotura 2.9 % ISO 527
Módulo de flexión, 23°C 8900 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 10 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 13 kJ/m² ISO 179/1eA
ASTM Data
Módulo de tracción 7610 MPa ASTM D 638
Esfuerzo de fractura a tracción 120 MPa ASTM D 638
Alargamiento a la rotura 2.4 % ASTM D 638
Módulo de flexión 7800 MPa ASTM D 790
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 153 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 161 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 164 °C ISO 306
ASTM Data
Estabilidad al calor @ 66 psi 161 °C ASTM D 648
Estabilidad al calor @ 264 psi 153 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1220 kg/m³ ISO 1183
Densidad 1220 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 80 - 100 °C -
Tiempo de pre-secado 2 - 4 h -
Temperatura de la masa 210 - 270 °C -
Temperatura del molde 15 - 60 °C -
Zona 1 190 - 230 °C -
Zona 2 200 - 250 °C -
Zona 3 210 - 270 °C -
Temperatura de boquilla 210 - 270 °C -
Contrapresión 1 - 1.5 MPa -
Características
Características
Homopolímero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.