Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G170 MED - PA* - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

PA,,MT,C12-020

Rilsan^® Clear G170 MED is a high performance transparent polyamide resin with outstanding thermal resistance. This grade offers the highest quality and is specifically designed to meet the stringent requirements of the medical applications.  Upon request letters regarding USP class VI  compliance can be provided.

Main applications:

• Medical perfusion tube accessories
• Breathing mask

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caracteristicas de procesamiento y fisicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Indice de fluidez volumétrico, MVR	2 / *	cm³/10min	ISO 1133
Temperatura	275 / *	°C	-
Carga	2.16 / *	kg	-
Contracción posterior al moldeo, paralelo	0.7 / *	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	0.7 / *	%	ISO 294-4, 2577

Propiedades mecánicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Módulo de tracción	2100 / 2020	MPa	ISO 527
Esfuerzo de fluencia	76 / 74	MPa	ISO 527
Alarg. en límite elástico	8 / 9	%	ISO 527
Alarg. nominal a rotura	>50 / >50	%	ISO 527
Resistencia al impacto Charpy c/entalla, +23°C	- / 13	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	- / 13	kJ/m²	ISO 179/1eA
Dureza Shore D	79 / *	-	ISO 7619-1

Propiedades térmicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min	168 / *	°C	ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa	136 / *	°C	ISO 75-1/-2
Estabilidad al calor, 0.45 MPa	150 / *	°C	ISO 75-1/-2
Temp. reblandecimiento Vicat, B	160 / *	°C	ISO 306
Coef.de expansión térmica lineal, paralelo	70 / *	E-6/K	ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom.	V-2 / *	class	IEC 60695-11-10
Espesores de probeta	1.6 / *	mm	-
Combustibilidad a espesor h	HB / *	class	IEC 60695-11-10
Espesores de probeta	0.8 / *	mm	-
Combustibilidad según índice de oxigeno	26 / *	%	ISO 4589-1/-2

Propiedades eléctricas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Resistividad volumétrica específica	- / 1E11	Ohm*m	IEC 62631-3-1
Resistividad superficial específica	* / 1E12	Ohm	IEC 62631-3-2
Resistencia dieléctrica	- / 50	kV/mm	IEC 60243-1
Indice comparativo de linea de fuga	* / 600	-	IEC 60112

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	3.8 / *	%	Sim. to ISO 62
Absorción de humedad	1.7 / *	%	Sim. to ISO 62
Densidad	1050 / 1050	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección, Otros tipos de extrusión

Forma de suministro

Sémola

Características especiales

Transparente

Certifications

Grado médico, USP Class VI

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

Injection molding conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 290°C / 310°C.
- Typical mold temperature  : 40 - 80 °C.
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C.

Extrusión de láminas

 Extrusion conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 280°C / 290°C.
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.