Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pyramid™ CC100 - PEEK-Z60 - Polymics, Ltd.

Material Data Center offers the following functions for Pyramid™ CC100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pyramid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto

PEEK with 60% Chopped Carbon Fabric/Tape.


Pyramid CC100 is chopped carbon fiber (1/4” or so to 1/2”) reinforced, feed

material can be in fiber bundles, chopped tapes or other irregular chopped fiber

forms. Typically used as reinforced structural components such as medical

Instruments.

Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 36000 MPa ASTM D 638
Esfuerzo de fractura a tracción 310 MPa ASTM D 638
Alargamiento a la rotura 1 % ASTM D 638
Módulo de compresión 25000 MPa ASTM D 695
Resistencia de compresión 275 MPa ASTM D 695
Módulo de flexión 34000 MPa ASTM D 790
Dureza Rockwell M 110 - ASTM D 785
Dureza D Shore 96 - ASTM D 2240
Resistencia al impacto Izod con entalla, 1/8 in 110 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Estabilidad al calor @ 264 psi 300 °C ASTM D 648
Temperatura de fusión 340 °C ASTM D 3418
Temperatura de transición vítrea 143 °C ASTM E 1356
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistividad superficial 100 Ohm ASTM D 257
Resistividad volumétrica 100 Ohm*cm ASTM D 257
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 0.05 % ASTM D 570
Densidad 1500 kg/m³ ASTM D 792
Características
Forma de suministro
Negro
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.