Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX9400W - Asia - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX9400W - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
NORYL GTX™ 9400W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits high heat resistance, high flow, and added mold release. NORYL GTX9400W resin is injection moldable and an excellent candidate for automotive under-the-hood applications such as power distribution boxes, relay boxes, connectors, sensors, and fuse box covers.

UL Yellow Card Link E207780-615350
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 97 g/10min ASTM D 1238
Temperatura 280 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 69 MPa ISO 527
Alargamiento a rotura 39 % ISO 527
Modulo de Flexión 2700 MPa ISO 178
Res. impacto Izod c/entalla, +23°C, 4mm 21 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 1950 MPa ASTM D 638
Esfuerzo de fluencia a tracción 64 MPa ASTM D 638
Esfuerzo de fractura a tracción 62 MPa ASTM D 638
Alargamiento a la fluencia 11 % ASTM D 638
Alargamiento a la rotura 40 % ASTM D 638
Resistencia al impacto Izod con entalla, 1/8 in 256 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 112 J/m ASTM D 256
Temperatura -30 °C -
Resistencia al impacto Izod, 1/8 in 849 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 78 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 187 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 203 °C ISO 306
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.5 mm -
ASTM Data
Estabilidad al calor @ 66 psi 190 °C ASTM D 648
Estabilidad al calor @ 264 psi 83 °C ASTM D 648
Temperatura Vicat 212 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1100 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 95 - 105 °C -
Tiempo de pre-secado 3 - 4 h -
Humedad de procesamiento ≤0.07 % -
Temperatura de la masa 270 - 295 °C -
Temperatura del molde 65 - 95 °C -
Zona 1 255 - 295 °C -
Zona 2 260 - 295 °C -
Zona 3 265 - 295 °C -
Velocidad de giro de husillo 20 - 100 rpm -
Contrapresión 0.3 - 1.4 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Applicaciones
Automotriz
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.