Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIRETAN B F30 GWT 850 - PA6-GF30 - Soredi S.p.a.

Material Data Center offers the following functions for NIRETAN B F30 GWT 850:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niretan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.0045 mm/mm ASTM D 955
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fractura a tracción 130 / - MPa ASTM D 638
Módulo de flexión 8500 / - MPa ASTM D 790
Resistencia a la flexión 180 / - MPa ASTM D 790
Dureza Rockwell R 115 / - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 96.1 / - J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 67.3 / - J/m ASTM D 256
Temperatura -20 °C -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Coef.de expansión térmica lineal, normal 40 / * E-6/K ISO 11359-1/-2
ASTM Data
Combustibilidad UL 94 V-2 - UL 94
Espesores de probeta 1.6 mm -
Estabilidad al calor @ 264 psi 205 °C ASTM D 648
Temperatura de fusión 220 °C ASTM D 3418
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 1MHz 3.8 / 4.2 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 200 / 1200 E-4 IEC 62631-2-1
Resistividad volumétrica específica 1E13 / 1E10 Ohm*m IEC 62631-3-1
Resistividad superficial específica * / 1E13 Ohm IEC 62631-3-2
Resistencia dieléctrica 34 / 24 kV/mm IEC 60243-1
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 6 % ASTM D 570
Densidad 1520 kg/m³ ASTM D 792
Características
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.