Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1000TL - PA66 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1000TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 1.8 / * % ISO 294-4, 2577
ASTM Data
Contracción posterior al moldeo, paralelo 0.018 mm/mm ASTM D 955
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 68 / - MPa ISO 527
Alargamiento a rotura 30 / - % ISO 527
Módulo de flexión, 23°C 2250 / - MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 17 / - kJ/m² ISO 180/1A
ASTM Data
Esfuerzo de fluencia a tracción 67.6 / 46.2 MPa ASTM D 638
Alargamiento a la rotura 40 / 130 % ASTM D 638
Módulo de flexión 2170 / 896 MPa ASTM D 790
Resistencia a la flexión 75.8 / 34.5 MPa ASTM D 790
Dureza Rockwell R 114 / R 94 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 160 / 210 J/m ASTM D 256
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 73 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 211 / * °C ISO 75-1/-2
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 1.5 mm -
Coeficiente de dilatación térmica, long. 110 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 228 °C ASTM D 648
Estabilidad al calor @ 264 psi 71 °C ASTM D 648
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ASTM Data
Resistencia dieléctrica, tiempo corto 21 / - kV/mm ASTM D 149
Resistividad volumétrica >1E15 / - Ohm*cm ASTM D 257
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Densidad 1100 / - kg/m³ ISO 1183
Absorción de agua, 24hr 1.2 % ASTM D 570
Densidad 1100 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Negro, Color natural
Aditivos
Lubricante
Applicaciones
Automotriz
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.