Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 1154 D FHF - (TPU-ARET) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

DESCRIPTION
Elastollan 1154 D FHF is a halogen free, flame retarded polyether based TPU

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at low temperature,
resistance to microbiological attack, good wear performance,
high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing, hoses, profiles

OTHER HINTS
predrying: 2-3h at 100-110°C,
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	160	MPa	ISO 527
Resistencia al impacto Charpy c/entalla, +23°C	50	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	3	kJ/m²	ISO 179/1eA
Tensión a 100% alargamiento	19	MPa	ISO 527
Tensión a 300% alargamiento	33	MPa	ISO 527
Resistencia a la tracción TPE	30	MPa	ISO 527
Alargamiento a rotura TPE	>300	%	ISO 527
Deformación permanente por compresión a 23°C, 24h	30	%	ISO 815
Deformación permanente por compresión a 70°C, 24h	45	%	ISO 815
Resistencia al desgarro	110	kN/m	ISO 34-1
Resistencia a la abrasión	40	mm³	ISO 4649
Dureza Shore D	55	-	ISO 7619-1

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom.	V-0	class	IEC 60695-11-10
Yellow Card disponible	sí	-	-
Combustibilidad a espesor h	V-0	class	IEC 60695-11-10
Espesores de probeta	3.0	mm	-
Yellow Card disponible	sí	-	-

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1270	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección, Extrusión de perfiles

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.