Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 192 - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 192:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Otras propiedades - Funciones
Any use of this information falls under the rules of our disclaimer.
Texto del producto
  • Injection molding grade
  • with high mechanical strength for articles subject to wear.
    Application:
  • Shift lever balls
  • Roller tires
  • Coupling elements
  • Shoe heels
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Tensión a 10% alargamiento 4 MPa ISO 527
Tensión a 100% alargamiento 9.5 MPa ISO 527
Tensión a 300% alargamiento 17 MPa ISO 527
Resistencia a la tracción TPE 52 MPa ISO 527
Alargamiento a rotura TPE >300 % ISO 527
Deformación permanente por compresión a 70°C, 24h 40 % ISO 815
Resistencia al desgarro 85 kN/m ISO 34-1
Resistencia a la abrasión 32 mm³ ISO 4649
Dureza Shore A 92 - ISO 7619-1
Dureza Shore D 42 - ISO 7619-1
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1230 kg/m³ ISO 1183
Funciones
Viscosidad-velocidad de cizallamiento , Desmopan 192, TPU, Covestro
Tensión de cizalla-velocidad de cizalla , Desmopan 192, TPU, Covestro
Módulo de cizallamiento dinámico-temperatura , Desmopan 192, TPU, Covestro
Esfuerzo-alargamiento (TPE) , Desmopan 192, TPU, Covestro
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusion del film, Extrusión de perfiles, Extrusión de láminas, Otros tipos de extrusión
Forma de suministro
Sémola, Granulado
Aditivos
Desmoldeante
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Demás información
Moldeo por inyección
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 90 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 210-225 °C
Mold temperature: 20-40 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.