Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Baystar™ Lumicene® mPE M3583 UV - PE - Bayport Polymers LLC

Material Data Center offers the following functions for Baystar™ Lumicene® mPE M3583 UV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Baystar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 6 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 641.2 MPa ASTM D 638
Esfuerzo de fluencia a tracción 17.9 MPa ASTM D 638
Esfuerzo de fractura a tracción 11.7 MPa ASTM D 638
Alargamiento a la fluencia 8 % ASTM D 638
Alargamiento a la rotura 340 % ASTM D 638
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Temperatura de fusión 122 °C ASTM D 3418
Temperatura Vicat 115 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 935 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo rotacional
Forma de suministro
Polvo
Características especiales
Estable contra rayos U.V./interperie
Características
High Gloss
Resistencia quimica
Resistencia al esfuerzo producido por condiciones ambientales
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.