Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ADVANCENE™ EE-3914-AAH - (PE-MD) - Egyptian Ethylene and Derivatives Company

Material Data Center offers the following functions for ADVANCENE™ EE-3914-AAH:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Advancene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
Other Standards[S]
Índice de fluidez, MFI 14 g/10min
Temperatura 190 °C -
Carga 21.6 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de flexión 760 MPa ASTM D 790
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 939 kg/m³ ASTM D 792
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de tracción, long. 35 MPa ASTM D 882
Esfuerzo de tracción, normal 27 MPa ASTM D 882
Esfuerzo de fluencia a tracción, long. 21 MPa ASTM D 882
Esfuerzo de fluencia a tracción, normal 23 MPa ASTM D 882
Alargamiento a la rotura, long. 500 % ASTM D 882
Alargamiento a la rotura, normal 660 % ASTM D 882
Características
Características especiales
Alto impacto o modificado al impacto
Características
Resina de mezcla, Copolímero, Copolímero de hexeno
Disponibilidad regional
Europa, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.