Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYREX CM-205M - PMMA - Chi Mei Corporation

Material Data Center offers the following functions for ACRYREX CM-205M:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Acryrex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 3 g/10min ISO 1133
Temperatura 230 °C -
Carga 3.8 kg -
Contracción posterior al moldeo, paralelo 0.4 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 3.5 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 3.8 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 68 MPa ISO 527
Resistencia a la tracción 68 MPa ISO 527
Módulo de flexión, 23°C 2800 MPa ISO 178
Resistencia a la flexión 103 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 2 kJ/m² ISO 179/1eA
Resistencia al impacto Izod con entalla, +23°C 2 kJ/m² ISO 180/1A
ASTM Data
Esfuerzo de fluencia a tracción 70.6 MPa ASTM D 638
Resistencia a la flexión 118 MPa ASTM D 790
Dureza Rockwell M 95 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/4 in 19.6 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 93 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 112 °C ISO 306
Temp. reblandecimiento Vicat, B 104 °C ISO 306
Coef.de expansión térmica lineal, paralelo 60 E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.5 mm -
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 1.5 mm -
Temperatura Vicat 115 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1190 kg/m³ ISO 1183
Densidad 1190 kg/m³ ASTM D 792
Características
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.