Material datasheets available free. Online registration at: www.materialdatacenter.com
Zetpol - HNBR - Zeon Corporation
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Zetpol" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...c resistance is improved. High mechanical strength values of up to 30MPa are achievable. New products on the market include low-Mooney, peroxide-curable HNBR grades such as Zetpol LL, the fully saturated Zetpol 2000 and Therban AT KA 8966 for the production of injection moulded O-rings, seals and gaskets. The main problem in the new and further development of low-Mooney HNBR grades lies in the sharp rise in viscosity during the hydration stage: the Mooney viscosity of the NBR feedstock is almost...
Kunststoffe international, 2005-11-21, Elastomers: Flexible and Customised
...y hydrated HNBR rubbers is being overcome by using lower-molecular-weight elastomers with a narrow molecular weight distribution. Products with Mooney viscosity values of less than 40, such as Therban AT VPKA 8966 (Lanxess) and Zetpol 2000LL (Zeon), are therefore permitting faster cycles and more complex geometries while providing high strength values at the same time. The extremely low-temperature-resistant, saturated HNBR product Zetpol 4300 (Zeon) also has a customised molecular structure, o...
Kunststoffe international, 2011-01-25, Appealing to (almost) all the Senses
...nt: No scission products are released during vulcanization. These UV silicones are now also available for medium and high voltage applications (Fig. 3). Zeon Chemicals, Tokyo, Japan, has expanded its range of hydrogenated nitrile rubbers (HNBR) with Zetpol EP. It was developed in order to reduce processing times for injection molded products, whilst retaining the high level of mechanical properties. Especially with complex shapes the new HNBR shows a clear improvement in flow properties. All the...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.