Material datasheets available free. Online registration at: www.materialdatacenter.com
Topas - COC - Topas Advanced Polymers GmbH
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Topas" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
Kunststoffe international, 2005-11-21, Cycloolefin Copolymer (COC): Appearance Counts
... ethylene and norbornes. By modifying the norborne content, it is possible to vary the properties of the material over a broad range and align them to the specific requirements of the application in question. Hence the heat resistance of the COC Topas can be set at between 60 and 170°C, as required. Since Topas was launched on the market four years ago, the crystal-clear transparency, high purity and low water-vapour permeability of the COC has repeatedly come under close scrutiny. These charact...
Kunststoffe international, 2005-11-21, Cycloolefin-Copolymers (COC)
...s structure and aliphatic character, they are colourless, highly transparent polymers. It is only in the UV range below 280 nm that transmission decreases significantly. An extended transmission range to below 200 nm is provided by the special grade Topas 8007X10. This is an essential prerequisite for its use in UV spectrosocopic analysis. In conjunction with COCs' high resistance to aqueous and polar organic media, such as acetone, ethanol, DMSO and acetonitrile, applications in medical dia...
Kunststoffe international, 2005-11-21, Good Growth Prospects: Ticona Sets its Stakes on Engineering Plastics
...ny. The new facility has an annual capacity of 60,000 t. Polyacetal market analysts have established demand of 150000 t for the polyacetal market overall, with annual growth rates of 7%. Since April, Polyplastics has been marketing Ticona's Topas COC material in the entire Asia-Pacific region. The Japanese company is intending to increase sales of this high-tech material, which is used inter alia in medical engineering and optical applications and also in the packaging industry, to 2000t by...
Kunststoffe international, 2005-11-21, High-performance Polymers: Metal Substitution and Miniaturisation
...The reason for this is the increased demand for printable films for PET beverage bottles, whose production volumes increased hugely following the introduction of the deposit on cans. The cycloolefin copolymer Topas 9506F-04 offers Ticona customers a shrink film with good printing properties, high stiffness for fitting on the bottles, a durable vapour barrier and 80% shrinkage, which is essential for irregular shaped bottles. The glass-like UV transmission of COC makes the copolymer ideal for med...
Kunststoffe international, 2005-11-21, Medical Technology for the Mass Market
...ering plastics in its range which have proved their suitability for the field of medical technology over many years: POM (grade: Hostaform/Celcon), PBT (grade: Celanex), PET (grade: Impet), TPE-E (grade: Riteflex), LCP (grade: Vectra), COC (grade: Topas), PE-UHMW (grade: GUR) and PPS (grade: Fortron). Depending on the particular grade, these plastics fulfil all the decisive requirements for medical technology, such as exceptionally low extractable content, very good chemical resistance, high dim...
Kunststoffe international, 2005-11-21, New Material with Potential: Cycloolefin Copolymer (COC)
... freedom, a more efficient production process, good compatibility as well as better shatter resistance. These benefits contributed to the decision of the glass specialist Schott to introduce a new series of prefillable syringes manufactured from Topas COC at the beginning of 2004. There is also great potential for diagnostic applications. These range from microtiter plates, lab CDs, biochips, cüvettes, and graduated vessels to tubes, pipettes and much more. The combination of transparency, purit...
Kunststoffe international, 2005-11-21, Production Monitoring: Particle Monitoring on the Extruder
...The New Particle Sensor The Leibniz Institute of Polymer Research in Dresden has developed an innovative laser-optical particle sensor in close cooperation with the Chair of Mechanical Process Engineering at the Technical University of Dresden and Topas GmbH, Dresden (Fig. 2). This sensor is based on the optical principle of light extinction. As soon as particles in the plastic melt pass through the laser beam, absorption and scatter effects cause a corresponding change in the signal on the dete...
Kunststoffe international, 2005-11-21, Starting Shot for COC
...COC, Ticona similarly synthesises 21,000 t/year norbornene in this plant, making it the biggest producer of this monomer, which is also to be offered for sale in future. Highly Diversified Applications The cycloolefin copolymer with the brand name Topas benefits from the essential properties of polyolefins, such as very good water vapour barrier action, low water absorption, good hydrolysis and chemical resistance against polar media and a low density. The typical high transparency of COC, tog...
Kunststoffe international, 2005-11-21, Unhindered Growth: Cyclic Olefin Copolymers (COC)
...y the processing method to be used. Tailormade Products Developed The development of tailormade formulations permits a very wide application spectrum for COC today. Ticona alone has added three new COC grades to its existing range this year. Topas 8007F-400, for example, is an improved extrusion grade excellently suited to the production of blown films. As compared with the first COC generation, the new grade opens up a very wide range of application possibilities because of its ‘robust’ proces...
Kunststoffe international, 2005-12-08, News
...to which all employees and production and research facilities will be transferred. Daicel and Polyplastics intend to hold interests in the joint venture of 55% and 45% respectively. Celanese subsidiary Ticona markets COC under the brand name Topas. Final conclusion of the deal is expected at the end of 2005, pending approval by the managements of the companies and regulatory authorities. As part of its portfolio optimization strategy, Celanese decided in December 2004 to divest its COC business...
Kunststoffe international, 2006-01-18, News
... of 55% and 45% respectively. Financial terms were not disclosed. Final conclusion of the deal is expected at the end of 2005, pending approval by regulatory authorities. Celanese subsidiary Ticona markets COC under the brand name of Topas.
Kunststoffe international, 2006-02-23, Process Optimisation: Hot Embossing of Microstructures
...hous, transparent polymers: - polymethylmethacrylate (PMMA, grade: Plexiglas 7H; manufacturer: Röhm GmbH, Darmstadt), - polycarbonate (PC) Makrolon 2805; manufacturer: Bayer MaterialScience AG, Leverkusen), - cycloolefin copolymer (COC, grade: Topas 6013; manufacturer: Ticona GmbH, Oberhausen), and two semi-crystalline, translucent polymers: - low-density polyethylene (PE-LD, grade: Lupolen 6031; manufacturer: BASF AG, Ludwigshafen), - polypropylene (PP, grade: Novolen 1100 L; manufacturer: Base...
Kunststoffe international, 2006-05-10, News
... plastics and rubber while expanding its position in the market. Xaloy, a supplier of screws and barrels for the injection moulding and extrusion industries, intends to use the purchase to become a key supplier to machine builders and processors. Topas: Honoured. Topas Advanced Polymers (TAP) has received the “Frost & Sullivan Award for Technology Leadership 2005“ for its contributions to the medical and pharmaceutical packaging industry. TAP produces a range of polymers with exceptional prop...
Kunststoffe international, 2006-08-06, Optically Perfect: PVD-coated Plastication Screws
...during deposition of CrAlON, oxygen and nitrogen are used, which form a ceramic coating system. Higher Optical Part Quality To study how strongly the plastic melts adhere to the CrAlON coating developed by IOT, a cycloolefinic copolymer (COC, type: Topas 5013-S04, manufacturer: Topas Advanced Polymers GmbH, Frankfurt/Germany) was used, among others. The methodology described below refers to this polymer. A contact angle measuring instrument is used to assess the strength of the adhesion of the ...
Kunststoffe international, 2007-07-18, Joint Solution
...rsonic waves or vibration are produced, which means that no oscillation is introduced into the parts, and no fluffs are generated. Paying account to the medical and mechanical demands posed to the assembly group, a cyclo olefin copolymer (COC) (Topas, manufacturer: Ticona GmbH) was used. So as to make sure laser beams are absorbed, the cartridge is colored either black or white. The white color is added a special absorber for the laser applied. However, the assembly group’s lid is transparent, ...
Kunststoffe international, 2008-09-23, Blends with Controllable Peel
...sed as a barrier layer in multilayer films. When incorporated as the core layer in laminated or coextruded multilayer films, COC ensure very good barrier properties against moisture and polar solvents and provide excellent clarity and stiffness [1]. Topas COC [1] contain two different monomers: ethylene and norbornene. Highly active metallocene catalysts link the two components norbornene and ethylene in the required ratio to each other (Fig. 2). The two hydrocarbons alternate regularly ...
Kunststoffe international, 2010-09-24, Facilitating Technical Life
...ectors as well as in automotive engineering. The reasons for this are not only their light weight but also their outstanding strength, flame resistance and easy processing into parts with tight tolerances, Hall 5, booth D11 Topas High Transparency Excellent purity and clarity coupled with a very good water vapor barrier and also strength and hardness are what Topas Advanced Polymers, Frankfurt/Main, Germany, claim for parts in cyclic olefin copolymers (COC). At the company”s booth, visitors will...
Kunststoffe international, 2011-05-12, Packagings Doing the Balancing Act
... view of the continuing trend to use contract packagers for bulk goods logistics, Windmöller & Hölscher KG in Lengerich, Germany, developed the high-performance Topas FFS-line. It is so flexible it enables “mobilization” to solve challenging situations in the bagging of a wide range of free-flowing bulk goods in silos in an efficient and flexible way. Interpack 2011 marks the trade show debut of the moveable W&H Topas machine. Visitors can see simulations of the unit in operation (Fig. 5...
Kunststoffe international, 2012-07-23, The Steepness of Acceleration
...r flow module (by Max Petek, Radolfzell, Germany) attached via the mold and automation area provided the quality of air required for clean room class 7. Four transparent vials were created per shot, made of a cyclic olefin copolymer (COC supplied by Topas Advanced Polymers GmbH, Frankfurt, Germany) with a parts weight of approx.1.2 g within a cycle time of 11 s. An IntElect 50 (500 kN clamping force) served for the demonstrations. It was equipped with the technology modules mentioned above, whic...
... ethylene and norbornes. By modifying the norborne content, it is possible to vary the properties of the material over a broad range and align them to the specific requirements of the application in question. Hence the heat resistance of the COC Topas can be set at between 60 and 170°C, as required. Since Topas was launched on the market four years ago, the crystal-clear transparency, high purity and low water-vapour permeability of the COC has repeatedly come under close scrutiny. These charact...
Kunststoffe international, 2005-11-21, Cycloolefin-Copolymers (COC)
...s structure and aliphatic character, they are colourless, highly transparent polymers. It is only in the UV range below 280 nm that transmission decreases significantly. An extended transmission range to below 200 nm is provided by the special grade Topas 8007X10. This is an essential prerequisite for its use in UV spectrosocopic analysis. In conjunction with COCs' high resistance to aqueous and polar organic media, such as acetone, ethanol, DMSO and acetonitrile, applications in medical dia...
Kunststoffe international, 2005-11-21, Good Growth Prospects: Ticona Sets its Stakes on Engineering Plastics
...ny. The new facility has an annual capacity of 60,000 t. Polyacetal market analysts have established demand of 150000 t for the polyacetal market overall, with annual growth rates of 7%. Since April, Polyplastics has been marketing Ticona's Topas COC material in the entire Asia-Pacific region. The Japanese company is intending to increase sales of this high-tech material, which is used inter alia in medical engineering and optical applications and also in the packaging industry, to 2000t by...
Kunststoffe international, 2005-11-21, High-performance Polymers: Metal Substitution and Miniaturisation
...The reason for this is the increased demand for printable films for PET beverage bottles, whose production volumes increased hugely following the introduction of the deposit on cans. The cycloolefin copolymer Topas 9506F-04 offers Ticona customers a shrink film with good printing properties, high stiffness for fitting on the bottles, a durable vapour barrier and 80% shrinkage, which is essential for irregular shaped bottles. The glass-like UV transmission of COC makes the copolymer ideal for med...
Kunststoffe international, 2005-11-21, Medical Technology for the Mass Market
...ering plastics in its range which have proved their suitability for the field of medical technology over many years: POM (grade: Hostaform/Celcon), PBT (grade: Celanex), PET (grade: Impet), TPE-E (grade: Riteflex), LCP (grade: Vectra), COC (grade: Topas), PE-UHMW (grade: GUR) and PPS (grade: Fortron). Depending on the particular grade, these plastics fulfil all the decisive requirements for medical technology, such as exceptionally low extractable content, very good chemical resistance, high dim...
Kunststoffe international, 2005-11-21, New Material with Potential: Cycloolefin Copolymer (COC)
... freedom, a more efficient production process, good compatibility as well as better shatter resistance. These benefits contributed to the decision of the glass specialist Schott to introduce a new series of prefillable syringes manufactured from Topas COC at the beginning of 2004. There is also great potential for diagnostic applications. These range from microtiter plates, lab CDs, biochips, cüvettes, and graduated vessels to tubes, pipettes and much more. The combination of transparency, purit...
Kunststoffe international, 2005-11-21, Production Monitoring: Particle Monitoring on the Extruder
...The New Particle Sensor The Leibniz Institute of Polymer Research in Dresden has developed an innovative laser-optical particle sensor in close cooperation with the Chair of Mechanical Process Engineering at the Technical University of Dresden and Topas GmbH, Dresden (Fig. 2). This sensor is based on the optical principle of light extinction. As soon as particles in the plastic melt pass through the laser beam, absorption and scatter effects cause a corresponding change in the signal on the dete...
Kunststoffe international, 2005-11-21, Starting Shot for COC
...COC, Ticona similarly synthesises 21,000 t/year norbornene in this plant, making it the biggest producer of this monomer, which is also to be offered for sale in future. Highly Diversified Applications The cycloolefin copolymer with the brand name Topas benefits from the essential properties of polyolefins, such as very good water vapour barrier action, low water absorption, good hydrolysis and chemical resistance against polar media and a low density. The typical high transparency of COC, tog...
Kunststoffe international, 2005-11-21, Unhindered Growth: Cyclic Olefin Copolymers (COC)
...y the processing method to be used. Tailormade Products Developed The development of tailormade formulations permits a very wide application spectrum for COC today. Ticona alone has added three new COC grades to its existing range this year. Topas 8007F-400, for example, is an improved extrusion grade excellently suited to the production of blown films. As compared with the first COC generation, the new grade opens up a very wide range of application possibilities because of its ‘robust’ proces...
Kunststoffe international, 2005-12-08, News
...to which all employees and production and research facilities will be transferred. Daicel and Polyplastics intend to hold interests in the joint venture of 55% and 45% respectively. Celanese subsidiary Ticona markets COC under the brand name Topas. Final conclusion of the deal is expected at the end of 2005, pending approval by the managements of the companies and regulatory authorities. As part of its portfolio optimization strategy, Celanese decided in December 2004 to divest its COC business...
Kunststoffe international, 2006-01-18, News
... of 55% and 45% respectively. Financial terms were not disclosed. Final conclusion of the deal is expected at the end of 2005, pending approval by regulatory authorities. Celanese subsidiary Ticona markets COC under the brand name of Topas.
Kunststoffe international, 2006-02-23, Process Optimisation: Hot Embossing of Microstructures
...hous, transparent polymers: - polymethylmethacrylate (PMMA, grade: Plexiglas 7H; manufacturer: Röhm GmbH, Darmstadt), - polycarbonate (PC) Makrolon 2805; manufacturer: Bayer MaterialScience AG, Leverkusen), - cycloolefin copolymer (COC, grade: Topas 6013; manufacturer: Ticona GmbH, Oberhausen), and two semi-crystalline, translucent polymers: - low-density polyethylene (PE-LD, grade: Lupolen 6031; manufacturer: BASF AG, Ludwigshafen), - polypropylene (PP, grade: Novolen 1100 L; manufacturer: Base...
Kunststoffe international, 2006-05-10, News
... plastics and rubber while expanding its position in the market. Xaloy, a supplier of screws and barrels for the injection moulding and extrusion industries, intends to use the purchase to become a key supplier to machine builders and processors. Topas: Honoured. Topas Advanced Polymers (TAP) has received the “Frost & Sullivan Award for Technology Leadership 2005“ for its contributions to the medical and pharmaceutical packaging industry. TAP produces a range of polymers with exceptional prop...
Kunststoffe international, 2006-08-06, Optically Perfect: PVD-coated Plastication Screws
...during deposition of CrAlON, oxygen and nitrogen are used, which form a ceramic coating system. Higher Optical Part Quality To study how strongly the plastic melts adhere to the CrAlON coating developed by IOT, a cycloolefinic copolymer (COC, type: Topas 5013-S04, manufacturer: Topas Advanced Polymers GmbH, Frankfurt/Germany) was used, among others. The methodology described below refers to this polymer. A contact angle measuring instrument is used to assess the strength of the adhesion of the ...
Kunststoffe international, 2007-07-18, Joint Solution
...rsonic waves or vibration are produced, which means that no oscillation is introduced into the parts, and no fluffs are generated. Paying account to the medical and mechanical demands posed to the assembly group, a cyclo olefin copolymer (COC) (Topas, manufacturer: Ticona GmbH) was used. So as to make sure laser beams are absorbed, the cartridge is colored either black or white. The white color is added a special absorber for the laser applied. However, the assembly group’s lid is transparent, ...
Kunststoffe international, 2008-09-23, Blends with Controllable Peel
...sed as a barrier layer in multilayer films. When incorporated as the core layer in laminated or coextruded multilayer films, COC ensure very good barrier properties against moisture and polar solvents and provide excellent clarity and stiffness [1]. Topas COC [1] contain two different monomers: ethylene and norbornene. Highly active metallocene catalysts link the two components norbornene and ethylene in the required ratio to each other (Fig. 2). The two hydrocarbons alternate regularly ...
Kunststoffe international, 2010-09-24, Facilitating Technical Life
...ectors as well as in automotive engineering. The reasons for this are not only their light weight but also their outstanding strength, flame resistance and easy processing into parts with tight tolerances, Hall 5, booth D11 Topas High Transparency Excellent purity and clarity coupled with a very good water vapor barrier and also strength and hardness are what Topas Advanced Polymers, Frankfurt/Main, Germany, claim for parts in cyclic olefin copolymers (COC). At the company”s booth, visitors will...
Kunststoffe international, 2011-05-12, Packagings Doing the Balancing Act
... view of the continuing trend to use contract packagers for bulk goods logistics, Windmöller & Hölscher KG in Lengerich, Germany, developed the high-performance Topas FFS-line. It is so flexible it enables “mobilization” to solve challenging situations in the bagging of a wide range of free-flowing bulk goods in silos in an efficient and flexible way. Interpack 2011 marks the trade show debut of the moveable W&H Topas machine. Visitors can see simulations of the unit in operation (Fig. 5...
Kunststoffe international, 2012-07-23, The Steepness of Acceleration
...r flow module (by Max Petek, Radolfzell, Germany) attached via the mold and automation area provided the quality of air required for clean room class 7. Four transparent vials were created per shot, made of a cyclic olefin copolymer (COC supplied by Topas Advanced Polymers GmbH, Frankfurt, Germany) with a parts weight of approx.1.2 g within a cycle time of 11 s. An IntElect 50 (500 kN clamping force) served for the demonstrations. It was equipped with the technology modules mentioned above, whic...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.