Material datasheets available free. Online registration at: www.materialdatacenter.com
Tipplen - PP - MOL Petrochemicals
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Tipplen" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...nvestigated, as well as PP bonded joints compared to wood flour-PP joints. Defined Conditions. The single-lap specimens (adherends, Fig. 1) employed for the evaluation of load-bearing properties were made of polypropylene (grade: Tipplen K948, manufacturer: TVK, Hungary) and a PP-wood composite (grade: Tipplen K948 + 50% weight proportion of Filtacel EFC1000 wood flour, manufacturer: J. Rettenmaier & Söhne, Germany). All plates for the single-lap specimens were produced on an injection mouldin...
Kunststoffe international, 2016-02-17, Simulate "Longer"
...F40-0414 P10; manufacturer: Celanese GmbH, Sulzbach, Germany) was manufactured by injection molding. Additionally an LFT with 20 wt. % long glass fibers (PP-LGF20) was also studied. The PP-LGF20 was produced by adding a straight PP copolymer (grade: Tipplen K199; manufacturer: TVK, Tiszaujváros, Hungary) to the PP-LGF40 by means of inline blending. The initial fiber length in the pellets was 10 mm.Analytical studies on injection-molded 2.5 mm thick sheets show that some effects that are less rel...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.