Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Texin® RxT65D - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Texin® RxT65D:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Texin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 4 g/10min ISO 1133
Temperature 220 °C -
Load 2.16 kg -
Molding shrinkage, parallel 0.8 % ISO 294-4, 2577
Molding shrinkage, normal 0.8 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Flexural modulus, 23°C 421 MPa ISO 178
Stress at 100% elongation 24.8 MPa ISO 527
Stress at 300% elongation 42.1 MPa ISO 527
Tensile Strength 51.7 MPa ISO 37
Strain at break 370 % ISO 37
Tear strength 210 kN/m ISO 34-1
Shore D hardness 65 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 138 °C ISO 306
Other propertiesValueUnitTest Standard
Density 1170 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 93 - 104 °C -
Pre-drying - Time ≥2 h -
Processing humidity ≤0.03 % -
Melt temperature 204 - 216 °C -
Mold temperature 16 - 38 °C -
Zone 1 199 - 210 °C -
Zone 2 202 - 213 °C -
Zone 3 202 - 213 °C -
Nozzle temperature 204 - 216 °C -
Screw speed 40 - 80 rpm -
Injection pressure 41.4 - 103 MPa -
Back pressure ≤5.5 MPa -
Holding pressure 24.8 - 82.7 MPa -
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 93 - 104 °C -
Pre-drying - Time ≥2 h -
Processing humidity ≤0.03 % -
Melt temperature 204 - 216 °C -
Feed temperature 188 - 199 °C -
Zone 1 199 - 210 °C -
Zone 2 199 - 210 °C -
Nozzle temperature 199 - 216 °C -
Characteristics
Processing
Injection Molding, Film Extrusion, Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion, Blow Molding
Delivery form
Natural Color
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Gamma irradiation sterilization
Chemical Resistance
Hydrolytically Stable, Radiation Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993
Applications
Medical
Regional Availability
North America, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.